Breath-A-Tech Anti-Static Spacer Pack of 6

Breath-A-Tech Anti-Static Spacer is a compact valved holding chamber for use with most standard asthma puffers in the management of asthma and COPD, intended for adults and children.

It can be used straight out of the pack, then cleaned at least once a month, or more often if needed, in a dishwasher up to 700C for up to 12 cycles.

Contents:
6 x Breath-A-Tech Anti-Static Spacer

Directions:
Remove the cap from the inhaler and shake well, then push it into the base of the spacer. Put the mouthpiece between the lips to make an airtight seal, depress the inhaler, then take a slow, deep breath and hold for 5 to 10 seconds, or breathe in and out through the spacer 4 to 6 breaths. Wait at least one minute before repeating, using only one dose at a time. If a face mask is needed, firmly attach it to the mouthpiece, place it over the mouth and nose, and check for an effective seal.

Warnings:
Always refer to the instructions provided with your asthma inhaler, and talk to your doctor if symptoms persist. Store between 50C and 400C at 15% to 95% relative humidity. Do not leave the chamber unattended with children. Check for foreign objects or damage before use, and replace immediately if any parts are damaged or missing. For reuse by a single patient only.

ARTG:
142303